Technical

Overview


The timber we use in Sentrel's products is primarily spotted gum, a naturally tough and resilient timber that is traditionally used to make tool handles, boats, springboards and furniture. It boasts a Class 1 rating of 40+ years out of ground durability, is termite resistant, is in the highest class of fire retardant timbers ... and, it looks great as well!

Sentrel panels are manufactured at our factory and delivered on-site ready to install. This minimises impact upon the site and reduces installation time for your builder, making our products an attractive and affordable choice.

The tension on the vertical cables is established and set in the factory and will stay taut for many years. If and when required, the cables can be easily re-tensioned in a few minutes.

Our products are guaranteed against structural failure within the tested and approved limits of the Australian Standards for balustrades and pool fencing.

Technical Document Resources

Product Specification - Sentrel Balustrades and Pool Fences Sentrel Timber Panels - Installation Instructions for the Handyman Sentrel Timber Panels - Installation Instructions for Builders Sentrel Timber Panels - Information required for Stairs Sentrel Timber Panels - Fitting Panels to Steel Posts Sentrel Aluminium System - Installation Instructions

Tensioning - How To

how_to_re-tension.jpg

 

Contact Sentrel

contact_phone.png 1300 658 330
contact_email.png jen@sentrel.com.au
contact_location.png PO Box 122 Bellingen NSW 2454